Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 103)

Loading a Weld File Chapter 11. Training
IM8002 Power Wave® Manager User Manual 11.9
Loading a Weld File
If you need to load an existing weld training file from the Preferences folder (page 4.1), you can easily do so
with Power Wave® Manager.
Procedure Details
1. Right-click the Weld Profile to which you want
to load the file.
2. Select Load training weld data file from the
pop-up menu.
3. Navigate to the weld data file you want
to load.
4. Select the file and click Load. The system adds the training file to the profile.
5. Click Apply settings. Power Wave® Manager saves the changes to the
Welding Power Source.
Copying a Weld File
If you need to copy a weld training file from one Weld Profile to another Weld Profile on the Welding
Power Source, Power Wave® Manager allows you to do this.
Procedure Details
1. Right-click the Weld Profile you want to copy.
2. Select Copy training weld data file from the
pop-up menu.
The system prompts you for the profile to which
you would like to save the copy.
3. Select the appropriate Weld Profile and
click OK.
4. Click Apply settings. Power Wave® Manager saves the changes to the
Welding Power Source.