Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 72)

Chapter 9. Tools Backup/Restore
9.6 Power Wave® Manager User Manual IM8002
data in smaller segments of time. The Zoom out icon ( ) condenses data and displays the time segments
in larger segments.
For example, if your chart currently displays one second of data segmented every millisecond and you click
the Zoom in icon, the chart begins to expand that one second into parts of a second. When you click the
Zoom out icon, the display condenses again to show you the data segmented every millisecond. (Displays
vary depending on the weld data.)
You can also click the Max Zoom icon ( ) to quickly display the most time segments or click the Min Zoom
icon ( ) to view the fewest time segments.
Backup/Restore
The Backup/Restore section of Power Wave® Manager allows you to save Welding Power Source settings
(e.g., memory configuration, lockout parameters, and network settings) to a backup file. You can use this
file to restore the saved settings at a later time to the same Welding Power Source or to a different power
source (e.g., if you want to configure each power source the same way).
Backing Up a Power Source
The Backup tab (Figure 9.6) provides you with the list of information in various categories that you will save
when you click the Backup button. Click through the sub-tabs to see what the backup file could contain.
The backup file will include the information if that information exists on the Welding Power Source.
Figure 9.6 Backup Tab