Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 63)

User Interface Chapter 8. Wire Feeder
IM8002 Power Wave® Manager User Manual 8.5
Figure 8.4 Multiple User Interface Drop-down
If you’re not sure the selection in the drop-down refers to the actual user interface you want to review,
click the Blink status light button. This causes the green status light on the User Interface to start blinking
rapidly, and you can verify you have the correct device selected in Power Wave® Manager.
Setup/Security Settings Tab
The Setup/Security Settings tab allows the user to modify several User Interface parameters and security
settings. The parameters and settings available on this tab vary depending on the User Interface
connected. Please refer to the appropriate Operator Manual for more detailed information on these
parameters.
Figure 8.5 Setup/Security Settings Tab
To change a parameter, double-click the parameter to open the edit window (Figure 8.5). Simply make
your change and click OK.