Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 16)

Chapter 1. Introduction Compatible Equipment
1.2 Power Wave® Manager User Manual IM8002
 Power Wave® AC/DC 1000, AC/DC 1000SD
 Power Wave® i400
 Power Wave® C300
 Power Wave® S350
 Power Wave® S500
The program may also be used to diagnose and modify settings in the following Welding Power Sources
outside the Power Wave® family that also use the digital common controls platform:
 Invertec® V350, V450
 Power MIG 300
 Power MIG 350MP
NOTE | The Power Wave® Manager application is not compatible
with legacy Power Wave® models such as the Power Wave®
450. The application also does not support dual wire
feeding system.
NOTE | Not all Welding Power Source models have an Ethernet
port. However, you can upgrade some models to utilize
Ethernet by adding the Communication Interface module,
available from Lincoln Electric as K2207-2 or K2436-1
(depending on the Power Wave® model).
Connecting to robotic applications could vary from the
information in this manual. Please refer to the appropriate
Operators Manuals for more information.