Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 26)

Chapter 4. Overview of Power Wave® Manager Connecting to the Welding Power Source
4.2 Power Wave® Manager User Manual IM8002
Ethernet Connection
The preferred method of connecting your computer to the Welding Power Source is through an Ethernet
connection, even if you do not know the specific IP address of the power source. Power Wave® Manager
can help you find it. The steps below walk you through connecting to the power source.
Figure 4.2 Connecting Using an Ethernet Connection
To connect the Power Wave® Manager application to the power source through an Ethernet connection:
Procedure Details
1. Open Power Wave® Manager. Generally, you can select Start > All Programs >
Lincoln Electric > Power Wave® Manager from the
computer’s main menu.
When Power Wave® Manager opens, it
automatically displays the Connect tab for you
(Figure 4.2).
2. Choose the Connect through Ethernet option.