Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 67)

IM8002 Power Wave® Manager User Manual 9.1
Chapter 9
Tools
The Tools section of Power Wave® Manager provides you with the ability look up an error codes you
receive from a Welding Power Source, create backup and troubleshooting files and view the weld as it is
being made.
Lookup Error
The Lookup error section allows you to obtain information about any error code given by a Welding Power
Source (Figure 9.1). When a Welding Power Source is in a faulted condition, it flashes an error code using
the Status light and blinking in red and green. Please refer to the Operator Manual for the Welding Power
Source for more detailed information on interpreting the error code on the specific power source.
TIP | The Lookup error section is available even if you are not
connected to a Welding Power Source.
Figure 9.1 Lookup Error Tool
To look up a certain error code, choose the type of error from the Event options, type in the error code
number in the text field and click the Lookup button. The system displays a description of the error, as well
as possible solutions or a possible course of action to resolve the error.