Lincoln Electric IM8002 POWER WAVE MANAGER - Manual (Page 70)

Chapter 9. Tools WeldView
9.4 Power Wave® Manager User Manual IM8002
Creating a Weld Trace
The WeldView Wizard allows you to fully configure the trace before starting it, including the trace
frequency, the event that begins the trace (i.e., the trigger event), and if you want to record an extra
channel with the trace.
Figure 9.4 WeldView Wizard
To capture a weld trace:
Procedure Details
1. Select to Tools > WeldView from the
navigation tree.
2. Click the Acquire new weld trace button
on the top toolbar.
The WeldView Wizard window opens to the trace
settings step (Figure 9.4).
3. Choose your trace settings and click Next. The trigger settings step displays.