Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 803)

Brocade Virtual ADX XML API Programmer’s Guide 793
53-1003248-01
List of Error Messages
A
SLB_TRACK_PORT_DEL_FAILED The Port %d is part of another track port group, and
cannot be added to two different track port groups.
Please specify a valid track port.
SLB_UNMATCH_COUNTER_OFFSET The counter offset does not match the specified Virtual
Server "%s" %d. Please specify the matching counter
offset for the Virtual Server.
SLB_URL_HTTP The URL cannot be configured to the specified port %d. A
URL can be configured only to a HTTP port.
SLB_URL_ONLY_ON_HTTP_SSL The URL applies to only HTTP or SSL protocol. Please
specify either the HTTP or SSL protocol.
SLB_URL_SWITCH_OFF The operation cannot be completed because the URL
switch is off.
SLB_URL_TCP The specified URL cannot be configured, as the port is
bound to a UDP port. Please set the Port Profile to TCP
first.
SLB_URL_TOO_LONG The specified URL parameter has exceeded the maximum
number of characters allowed. Please specify the URL not
more than 256 characters.
SLB_VIP_PORT_AWAITING_SHUTDOWN The Virtual Server Port "%s":"%s" is currently awaiting
shutdown. No additional requests can be processed for
the Virtual Server Port while it is awaits shutdown.
SLB_VIP_PORT_DELETION_FAIL Failed to delete the specified VIP port "%s":"%s". Please
specify a valid VIP port.
SLB_VIP_PORT_PART_OF_PORT_RANGE The specified VIP port "%s":"%s" is part of a port range "%s
". Please specify a VIP port which is not part of a port
range.
SLB_VIP_PORT_SSL_PROFILE_INVALID Cannot configure an invalid SSL profile "%s" on the
specified VIP port "%s ":"%s". Please specify a valid SSL
profile which is configured with the key, certificate and
cipher suite.
SLB_VIP_PORT_SSL_PROXY_ALREADY_CONFIGURED Cannot configure SSL proxy on the specified VIP port
"%s":"%s". Please unbind the SSL terminate on the VIP
port before configuring the SSL proxy.
SLB_VIP_PORT_SSL_TERMINATE_ALREADY_CONFIG
URED Cannot configure the SSL terminate on the specified VIP
port "%s":"%s". Please unbind the SSL proxy on the VIP
port before configuring the SSL terminate.
SLB_VIP_PORT_STATELESS_UNSUPPORTED Stateless configuration is enabled, and so the virtual port
"%s": "%s" cannot be configured. Please disable stateless
configuration before you can configure the virtual port.
SLB_VIP_PORT_WITH_DSR_UNSUPPORTED The specified port "%s" in the Virtual Server "%s" (%I) has
been configured with DSR. Please specify a VIP port
without a DSR configuration.
SLB_VIP_PROTECTED The VIP is already protected. The configuration of SIP,
RTSP, MMS, TFTP, or FTP protocols are unsupported.
SLB_VIP_PROTECTION_CONFIG_FAIL VIP protection cannot be configured. The SIP, RTSP, FTP,
TFTP, or MMS protocols are configured.
TABLE 109 List of error messages
Error String Message