Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 722)

712 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data Structures
7
gslbSiteSummary
This structure is the high-level description of GSLB site.
TABLE 69 gslbSiteSummary structure
Name Type Presence Rules Description
name string Mandator
y Maximum 16
characters. Name of the GSLB site.
adxList gslbAdx [ ] Optional List of ADX Servers.
weight unsignedInt Optional Valid value
range is from
0 to 100.
Default value
is 0. Assign weights to the
Site.
geographicLocation gslbSiteGeographicLocation Optional Set or clear geographic
location.
noDistributedHealthCheck boolean Optional Default value
is "TRUE". Enable or disable the
non-distributed health
check feature for an
entire GSLB Site.
enableEnhancedRttSmoothing boolean Optional Default value
is “FALSE”. Enable or disable
enhanced RTT
smoothing.
maxRttAllowedDeviation unsignedInt Optional Valid value
range is from
50 to
100000
percent.
Default value
is 400
percent. Specifies the
maximum RTT
deviation allowed for a
site.
maxRttSampleIgnoreCount unsignedInt Optional Valid value
range is from
1 to 20.
Default value
is 3. Specifies the
maximum ignore
counter. Defines how
many consecutive very
high or very low new
RTT samples to ignore
before factoring them
into the existing RTT
value
maxRttSampleRampFactor unsignedInt Optional Valid value
range is from
1 to 50
percent.
Default value
is 10
percent. Specifies the factor by
which a RTT sample in
the acceptable range,
should be factored into
the existing RTT value.