Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 283)

Brocade Virtual ADX XML API Programmer’s Guide 273
53-1003248-01
Data structures
4
IPv6NeighborSummary
This structure is the high-level description of an IPv6 neigbor.
IPv6Statistics
This structure is the high-level description of IPv6 statistics.
startValue string Optional This parameter is
Optional and
considered only
when “operator”
value is “RANGE”. Start value in a range.
endValue string Optional This parameter is
Optional and
considered only
when “operator”
value is “RANGE”. End value in a range.
TABLE 676 Attributes
Members Type Presence Rules Description
ipv6Address string Mandatory Maximum string
length 64 The 128-bit IPv6 address of the
neighbor
vlan unsignedInt Mandatory The VLAN on which the entry was
learned.
linkAddress string Mandatory Maximum string
length 64 The 48-bit interface ID of the
neighbor.
state neighborStateEnum Mandatory The current state of the neighbor.
age unsignedInt Mandatory The number of seconds the entry
has remained unused.
port string Mandatory Maximum string
length 64 The physical port on which the
entry was learned.
isRouter boolean Mandatory Determines if the neighbor is a
router or host.
TABLE 677 Attributes
Members Type Presence Rules Description
received unsignedLong Mandatory The total number of IPv6 packets received by the
router.
sent unsignedLong Mandatory The total number of IPv6 packets originated and sent
by the router.
forwarded unsignedLong Mandatory The total number of IPv6 packets received by the
router and forwarded to other routers.
delivered unsignedLong Mandatory The total number of IPv6 packets delivered to the
upper layer protocol.
rawOutput unsignedLong Optional This information is used by Brocade Technical Support
TABLE 675 Attributes
Members Type Presence Rules Description