Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 117)

Brocade Virtual ADX XML API Programmer’s Guide 107
53-1003248-01
Data structures
3
RadiusServerFilter
This structure is a filter which consist of simple and can also add other complex types later.
RadiusServerSimpleFilter
This structure is a high-level description of filter for RADIUS server filter information.
retransmitCount unsignedInt Optional This parameter’s valid
value ranges between
0 and 5. The default
value is 3. This parameter specifies the
maximum number of
retransmission attempts.
timeout unsignedInt Optional This parameter’s valid
value ranges between
1 and 15. The default
value is 3 seconds. This parameter specifies how
many seconds the Brocade
Virtual ADX device waits for a
response from the RADIUS
server before either retrying the
authentication request, or
determining that the RADIUS
server is unavailable and
moving on to the next
authentication method in the
authentication-method list.
sourceInterface InterfaceID Optional Supported only in
router mode. Specify interface for source
address in RADIUS packets.
nasIdentifier string Optional Maximum 64
characters is allowed.
The string can be from
1 – 64 characters in
length. This parameter identifies the
NAS originating the access
request. It is only used in
access-request packets. Either
NAS-IP-Address or NAS-Identifier
must be present in an
access-request packet.
vlan unsignedInt Optional Allowed value range is
1 to 4095. Specifies the VLAN ID.
TABLE 261 Attributes
Parameters Type Presence Rules Description
simpleFilter RadiusServerSimpleFilter Optional Simple filter
TABLE 262 Attributes
Parameters Type Presence Rules Description
field radiusServerFilterFieldEnum Mandatory Filter field name.
operator filterOperatorEnum Mandatory Filter operator type.
value string Optional Ignored when
“operator” value is
“RANGE”. Value of the field for
filtering.
TABLE 260 Attributes
Parameters Type Presence Rules Description