Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 274)

264 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
4
IPInterfaceInfo
This structure is a high-level description of IP interface information.
IPInterfaceSummary
This structure is the high-level description of an IP interface summary.
TABLE 654 Attributes
Name Type Presence Rules Description
interfaceName string Optional The type and the slot and port number of the
interface.
portState string Optional Port state.
ipMask string Optional The subnet mask.
ipAddress string Optional The IP address of the interface.
configStatus string Optional The IP address has been configured on the
interface.
method string Optional The IP address has been saved in NVRAM.
linkStatus string Optional The link status of the interface.
protocolUpDown string Optional The interface can provide two-way
communication.
encapsulation string Optional Encapsulation
mtu unsignedInt Optional The Maximum Transmission Unit (MTU), which
specifies the maximum packet
size for packets sent and received on this
interface.
metric unsignedInt Optional Metric
directBroadcastForward twoWayToggleEnum Optional Directed-broadcast-forwarding status.
proxyArpState twoWayToggleEnum Optional The proxy-arp status.
ipArpAge unsignedInt Optional IP ARP age.
helperAddress string Optional Helper addresses config status.
inboundIPAccessList string Optional Inbound IP access list information.
outgoingIPAccessList string Optional Outgoing IP access list information.
TABLE 655 Attributes
Members Type Presence Rules Description
port string Mandatory Maximum string length 64 Port information.
ipAddress string Mandatory Maximum string length 64 IP address.
okStatus string Mandatory Maximum string length 64 OK status.
method string Mandatory Maximum string length 64 Method information.
status string Mandatory Maximum string length 64 Status of the interface.
protocol string Mandatory Maximum string length 64 Protocol associated with the interface.