Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 161)

Brocade Virtual ADX XML API Programmer’s Guide 151
53-1003248-01
Enumerations
3
haSlbStateEnum
These are the enumerations for and SLB state enumerated list.
haStatusEnum
These are the enumerations of the High Availability (HA) status enumerated list.
haVipSymStateEnum
These are the enumerations of the HA VIP state enumerated list.
ENABLE_VRRP Enables VRRP in the Brocade Virtual ADX switch.
ENABLE_VRRP_EXTENDED Enables VRRP extended in the Brocade Virtual ADX switch.
TABLE 369 Attributes
Parameters Description
SLB_SYNC_COMPLETE All the synchronization requests from the local Brocade Virtual ADX switch have
been sent to the peer Brocade Virtual ADX switch.
SLB_SYNC_REQ_MAP Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual
ADX switch for port map information.
SLB_SYNC_REQ_MAC Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual
ADX switch for MAC information.
SLB_SYNC_REQ_SERVERS Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual
ADX switch for Server mapping.
SLB_SYNC_REQ_L4 Denotes the local Brocade Virtual ADX switch is requesting the peer Brocade Virtual
ADX switch for session synchronization (fail-over session sync).
TABLE 370 Attributes
Parameters Description
ACTIVE Indicates the active device in the HA pair.
STANDBY Indicates the standby device in the HA pair.
TABLE 371 Attributes
Parameters Description
DISABLED Disabled
ENABLED Enabled
ACTIVE_CAPABLE Active and capable
STANDBY Standby mode
SUSPECT Suspect
ACTIVE Active mode
TABLE 368 Attributes
Parameters Description