Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 256)

246 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
4
GlobalIPInfo
This structure is the high-level description of global IP information.
GlobalStp
This structure is a high-level description of global STP.
TABLE 626 Attributes
Parameters Type Presence Rules Description
timeToLive unsignedInt Optional Valid value range is from
64 to 9216.
Make sure that the IP
MTU of the interfaces is
always greater than the
MSS value. This parameter is used to
define the Global TCP MSS IPv4
value for all SYN-ACK packets
generated by a Virtual ADX.
arpAge unsignedInt Optional This parameter is used to
define the global TCP MSS IPv6
configuration.
bootpHops unsignedInt
routerID unsignedInt
enabledProtocols string
disabledProtocols string
staticRouteInfo StaticRoute
TABLE 627 Attributes
Name Type Presence Rules Description
vlanID string Optional The port-based VLAN that contains this
spanning tree.
rootID string Optional The ID assigned by STP to the root bridge for
this spanning tree.
rootCost unsignedInt Optional The cumulative cost from this bridge to the
root bridge.
rootPort string Optional The port on this device that connects to the
root bridge.
priority string Optional Spanning tree priority of the device or VLAN.
maxAge unsignedInt Optional The number of seconds the device or VLAN
waits for a hello message.
helloSeconds unsignedInt Optional The interval between each configuration
BPDU sent by the root bridge.
holdSeconds unsignedInt Optional The minimum number of seconds that must
elapse between transmissions of consecutive
configuration BPDUs on a port.
forwardDelaySeconds unsignedInt Optional The number of seconds this device or VLAN
waits following a topology change and
consequent re-convergence.
lastChangeSeconds unsignedInt Optional The number of seconds since the last time a
topology change occurred.