Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 565)

Brocade Virtual ADX XML API Programmer’s Guide 555
53-1003248-01
Enumerations
5
virtualServerPortFilterFieldEnum
This type of data describes the enumerations of the virtual server port filter.
ENABLE_WINDOWS_TERMINAL_SERVERPORT Enables the windows terminal server port.
ENABLE_STICKY_ACL Enables sticky ACL.
ENABLE_DROP_ACK_WITH_NODATA Drops acknowledgement with no data.
ENABLE_SSL_SESSIONID_SWITCHING Enables SSL session ID switching on the virtual server port.
ENABLE_SWL4_PBSLB Enables policy-based SLB on a virtual server port.
ENABLE_WAITFOR_ENDHTTP The device buffers all request packets until all the necessary
information is received ensuring that the whole HTTP header is
saved.
MINIMUM_HEALTHY_SERVERS The minimum number of real server ports that are bound to the
virtual server port and are healthy and in the UP state.
ENABLE_NOSTICKY_EXCEED_MAX Enables no-sticky-exceed-max on the virtual server port.
TCP_ONLY Allows only TCP traffic to the virtual server port.
ENABLE_UDP_FASTDEL_CNT Enables UDP fast aging.
UDP_ONLY Allows only UDP traffic to the virtual server port.
ENABLE_TRACK_PORTGROUP Enables track port group.
CSW_POLICY Name of the CSW policy
PORT_POLICYNAME Name of the port policy
ENABLE_BACKUPSERVER_USE Identifies whether to use backup server while server associated
with this port goes down.
ENABLE_BACKUPSTAY_ACTIVE Identifies whether this port should keep using the backup
server even if primary server is active.
TCP_MSS TCP MSS
TABLE 557
Parameters Description
SERVER_NAME Server name.
SERVER_IP Server IP address.
PORT_NAME_OR_NUMBER Port name or number.
CURRENT_CONNECTIONS Current connections.
TABLE 556
Parameters Description