Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 731)

Brocade Virtual ADX XML API Programmer’s Guide 721
53-1003248-01
Enumerations
7
staticPrefix
This structure is the high-level description of static prefix in GSLB policy.
Enumerations
activeRttSelectionEnum
These are the enumerations for types of active RTT selections.
dnsReturnCodeEnum
These are the enumerations for DNS return codes.
cacheInterval unsignedInt Optional Valid range is from 10
to 1000000 seconds.
Default value is 120
seconds. Duration to age out client
prefixes in cache.
cachePrefixLength unsignedInt Optional Valid length is from
range 1 to 31. Default
value is 20. Prefix length at which to
aggregate measured RTT
in cache.
explorePercentage unsignedInt Optional Value is a percentage.
Valid range is from 0 to
100. Default value is 5
percentage. Percent of time to explore
Brocade Virtual ADX
devices not currently in
RTT cache.
tolerance unsignedInt Optional Value is a percentage.
Valid range is from 0 to
100. Default value is
10 percent. Tolerance in the RTT
difference between two
choices.
TABLE 85 staticPrefix structure
Name Type Presence Rules Description
ipAddress string Mandatory Static prefix IP address.
maskLength unsignedInt Mandatory Valid value range is from
1 to 31. Static prefix subnet mask length.
TABLE 84 rttMetric structure
Name Type Presence Rules Description
TABLE 86 activeRttSelectionEnum
Parameters Description
USE_ACTIVE_AND_PASSIVE_RTTS Use active and passive Site ADX RTTs for GSLB selection.
USE_ACTIVE_RTTS_ONLY Use only active Site ADX RTTs for GSLB selection.
USE_PASSIVE_RTTS_ONLY Use only passive Site ADX RTTs for GSLB selection.