Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 562)

552 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
5
virtualServerAttributeEnum
This type of data describes the virtual server attributes enumerated list.
TABLE 553
Parameters Description
CLIENT_MAX_CONN_LIMIT The maximum number of client connections allowed for the virtual
server.
CLIENT_TCPRATE_TRANSACTION_LIMIT The maximum number of TCP transactions allowed for the virtual
server.
CLIENT_UDPRATE_TRANSACTION_LIMIT The maximum number of UDP transactions allowed for the virtual
server.
CLIENT_ICMPRATE_TRANSACTION_LIMIT The maximum number of ICMP transactions allowed for the virtual
server.
DESCRIPTION The description of the virtual server.
STICKY_AGE_MULTIPLIER The sticky-age multiplier per VIP
TCP_AGE The number of minutes the Brocade Virtual ADX allows a TCP
connection to remain unused before closing the connection.
TCP_MSS TCP MSS
UDP_AGE The number of minutes the Brocade Virtual ADX allows a UDP
connection to remain unused before closing the connection.
ADVERTISE_VIP_ROUTE The availability of a virtual server address is advertised throughout
the network.
SYM_PRIORITY The symmetric SLB priority configured on the Brocade Virtual ADX
device.
SYMPRIORITY_FACTOR The current dynamically set priority and the decrement value.
INJECT_ALWAYS Enables the Brocade Virtual ADX device inject a VIP route inside the
routing process regardless of its virtual server ownership status.
STICKY_AGE_MULTIPLIER The multiplier value that is applied to the global sticky age value for
a specific virtual server.
ENABLE_VIP_PROTECTION Enables VIP protection, therefore the traffic to a port that is not
defined under a VIP is denied.
PREDICTOR The load balancing predictor that the Brocade Virtual ADX device
uses to balance traffic among the real servers that are bound to
the virtual server.
ADMIN_STATE The administrative state of the virtual server.
ACCESSCONTROL_LIST_ID Identifies the ID of the ACL whose rules must be applied to virtual
server.
ENABLE_ACLNAT_OVERRIDE Identifies whether the ACLNAT is to be overridden.
ENABLE_FALLBACK_TO_DEFAULT_GATEWAY Identifies whether a default gateway is to be used if the next-hop is
not contactable.
HOST_RANGE Specifies the range for the host.
NEXT_HOP Specifies the next hop.
TOS_MARKING The TOS setting for layer 3 DSR.
TCP_MSS