Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 627)

Brocade Virtual ADX XML API Programmer’s Guide 617
53-1003248-01
Data structures
6
NatConfig
This structure is the high-level description of NAT configuration.
NatPool
This structure contains the high level description of a NAT pool.
TABLE 170 Attributes
Name Type Presence Rules Description
enableForwardingOnSessionNotFound boolean Optional Enables or disables the
forwarding of packets
without NAT translation
when sessions are not
found.
enableStatelessStaticNat boolean Optional Enables or disables
stateless static NAT.
timeoutInfo NatTranslationTimeout Mandatory Configures NAT
Translation timeout
information.
TABLE 171 Attributes
Name Type Presence Rules Description
poolName string Mandatory Maximum 255
characters. Specifies the Pool name.
startIP string Mandatory Start IP address.
endIP string Mandatory End IP address.
subnetMask string Optional Either
"subnetMask" or
"subnetMaskLengt
h" must be
present. Both
cannot be present
together. Subnet mask address.
subnetMaskLength unsignedInt Optional Either
"subnetMask" or
"subnetMaskLengt
h" must be
present. Both
cannot be present
together. Subnet mask length.
priority natPoolTypeEnum Optional Specifies a value of 1 or 2 and
enables static NAT redundancy.
A value of 2 means higher
priority, and will own the NAT IP
as long as the system is up.