Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 745)

Brocade Virtual ADX XML API Programmer’s Guide 735
53-1003248-01
List of Error Messages
A
CONFIG_SYNC_DUPLICATE_SYM_PRIORITY_MAP_EN
TRY The specified Sym priority map entry with Sender value =
%u and Receiver value = %u already exists. Please
specify a unique Sym priority map entry.
CONFIG_SYNC_FILE_SYNC_TASK_INITIATION_FAILED The File sync or Config sync task failed to initiate. Please
try again later.
CONFIG_SYNC_FLASH_ERASE_IN_PROGRESS A Flash erase is in progress. Please wait for some time
before proceeding.
CONFIG_SYNC_IN_PROGRESS_RETRIEVAL_FAILED A Config sync is in progress, and the status information
cannot be retrieved. Please try again later.
CONFIG_SYNC_INCOMPATIBLE_PEER_ADX The Peer ADX is not compatible, because of a '%s'
mismatch.
CONFIG_SYNC_INCR_CONFIG_NOT_AVAILABLE The incremental Config sync has not started, as no
configurations are available for syncing. Please apply
configurations before retrying.
CONFIG_SYNC_INCR_FORCE_UNSUPPORTED The parameter "isForced" is not supported for the
incremental config- sync operation. Please try without
providing the "isForced" parameter.
CONFIG_SYNC_INTERFACE_TYPE_UNSUPPORTED The specified interface type is not supported. Please
specify an Ethernet interface only.
CONFIG_SYNC_INVALID_OPERATION_TYPE The specified Config sync operation type is invalid. Please
specify a valid Config sync operation type.
CONFIG_SYNC_INVALID_PEER_MAC The specified peer or destination MAC address is invalid.
Please specify a valid MAC address, which is a
non-broadcast and a non-multicast address.
CONFIG_SYNC_INVALID_PORT_STATE The state of the configured Config sync port %P is %s.
Please enable the port and try again.
CONFIG_SYNC_MAX_SYM_PRIORITY_MAP_ENTRIES_
REACHED The maximum allowed Sym priority map entries %d
already reached. Please remove the existing entries
before creating new Sym priority map entries.
CONFIG_SYNC_MISSING_CONFIG The Config sync configuration details are missing. Please
specify valid Config sync configuration details.
CONFIG_SYNC_MISSING_INTERFACE_ID The mandatory parameter interface ID is missing. Please
specify a valid interface ID.
CONFIG_SYNC_MISSING_OPERATION_TYPE The mandatory parameter Config sync operation type is
missing. Please specify a valid Config sync operation
type.
CONFIG_SYNC_MISSING_PEER_MAC The mandatory parameter peer MAC address or
destination MAC address is missing. Please specify a
valid peer or destination MAC address.
CONFIG_SYNC_MISSING_SENDER_OR_RECEIVER_SY
M_PRIORITY_MAP_VALUE The Sender or the Receiver Sym Priority map value is
missing. Please specify both the Sender and Receiver
Sym priority map values.
CONFIG_SYNC_MISSING_VLAN_ID The mandatory parameter VLAN ID is missing. Please
specify a valid VLAN ID.
CONFIG_SYNC_MODE_NOT_CONFIGURED The Config sync mode is not configured. Please configure
the Config sync mode.
TABLE 109 List of error messages
Error String Message