Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 169)

Brocade Virtual ADX XML API Programmer’s Guide 159
53-1003248-01
Enumerations
3
L4_GSLB_HEALTH_CHECK_IP_UP L4 GSLB health check IP_UP
L4_GSLB_REMOTE_CONTROLLER_UP L4 GSLB remote GSLB SI down
GSLB_REMOTE_CONTROLLER_DOWN L4 GSLB remote GSLB SI up
L4_GSLB_REMOTE_DOWN L4 GSLB remote SI down
L4_GSLB_REMOTE_UP L4 GSLB remote SI up
L4_HTTP_MATCH_LIST L4 HTTP match list
L4_MAX_SESSION_LIMIT L4 maximum session limit
L4_PORT_DOWN L4 port down
L4_PORT_UP L4 port up
L4_SERVER_DOWN L4 server down
L4_SERVER_MAX_CONNECTION L4 server maximum connection
L4_SERVER_UP L4 server up
L4_SERVER_PORT_UP L4 server port up
L4_SERVER_PORT_DOWN L4 server port down
L4_SWITCH_ACTIVE L4 switch active
L4_SWITCH_STANDBY L4 switch standby
L4_TCP_SYN_LIMIT L4 TCP syn limit
LINK_DOWN Link down
LINK_UP Link up
LOCKED_ADDRESS_VIOLATION Locked address violation
NEW_ROOT New root
OSPF Supported only in router mode.
POWER_SUPPLY_STATE_CHANGE Power supply state change
REDUNDANT_MODULE_STATE_CHANGE Redundant module state change
STP_NEW_ROOT STP new root
STP_TOPOLOGY_CHANGE STP topology change
TEMPERATURE_WARNING Temperature warning
TOPOLOGY_CHANGE Topology change
VRRP VRRP trap can be enabled/disabled only if VRRP feature
is enabled. Supported only in Router mode.
VRRPE VRRPE trap can be enabled/disabled only if VRRPE
feature is enabled. Supported only in Router mode.
MODULE_INSERTED Supported only in 4U and 10U.
MODULE_REMOVED Supported only in 4U and 10U.
TABLE 396 Attributes
Parameters Description