Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 554)

544 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Enumerations
5
realServerAndPortStatusEnum
This data describes the real server and port enumerated list.
realServerAttributesEnum
This is an enumerated list describing the real server configuration attributes.
WEIGHTED_ROUND_ROBIN_STATIC The static weighted round robin method.
DYNAMIC_WEIGHTED_DIRECT The dynamic weighted direct method.
DYNAMIC_WEIGHTED_REVERSE The dynamic weighted reverse method.
TABLE 531
Parameters Description
DISABLED The port is disabled.
ENABLED The port is enabled.
FAILED The last operation on port failed.
TESTING Testing
HELD Held
SUSPECT Suspect
WAIT_SHUTDOWN The port is waiting to be shutdown.
WAIT_DELETE The port is in deleting state.
ACTIVE The port is active.
UNDEFINED The port is not defined.
NOTBOUND The port is not bound to any virtual server port.
TABLE 532
Parameters Description
ALIAS_NAME The alias name of a real server.
IS_BACKUP The backup server name.
DESCRIPTION The description of a real server.
ALL_SESSIONS All the sessions running on a real server.
HOP_COST_MULTPLIER The hop cost multiplier for a real server.
SIP_SESSION The SIP session through a real server.
TOTAL_CONNECTION_COUNTER The total connection counter of a real server.
ADMIN_STATUS The admin status of the real server.
ALTERNATIVE_MAC_ADDR The alternative MAC address required for health check
purposes.
IS_REMOTE_SERVER Specifies whether the server is a remote server or not.
ENABLE_PING_HEALTH_CHECK Enables ping health check of the server.
TABLE 530
Parameters Description