Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 165)

Brocade Virtual ADX XML API Programmer’s Guide 155
53-1003248-01
Enumerations
3
radiusServerGlobalConfigParametersEnum
This structure is a high-level description of RADIUS server configuration parameters enumerated
list.
radiusServerRoleEnum
This structure is a high-level description of RADIUS server use enumerated list.
roleEnum
This type of data will be a role enumerated list.
TABLE 383 Attributes
Parameters Description
KEY Default access string (maximum 32 characters).
DEAD_TIME Server dead time in seconds.
RETRANSMIT_COUNT Number of retries before giving up (maximum 5 times).
TIMEOUT Server time out in seconds (maximum 15 seconds).
SOURCE_INTERFACE Specify interface for source address in RADIUS packets. Supported only in
router mode.
NAS_IDENTIFIER Default access string (maximum 64 characters).
VLAN Specifies the VLAN information.
TABLE 384 Attributes
Parameters Description
ACCOUNTING_ONLY Use server for accounting only.
AUTHENTICATION_ONLY Use server for authentication only.
DEFAULT Use server for any AAA operation.
TABLE 385 Attributes
Parameters Description
NO_CONFIG The user is configured without any role.
NONE The user is not allowed to do both GET and SET operations.
VIEWER The user is allowed only to do GET operations.
OPERATOR The user is allowed to do GET operations and port-based operations such as Enable, Disable, and
so on.
MANAGER The user is allowed to do both GET and SET operations.