Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 533)

Brocade Virtual ADX XML API Programmer’s Guide 523
53-1003248-01
Data structures
5
VirtualServerPortConnStats
This structure is a high-level description of any virtual server port connection status.
enableSessionSync boolean Optional Specifies whether session sync is
enabled for this port.
stateless boolean Optional Specifies whether the port is
stateless.
disableHashing boolean Optional Specifies whether the stateless
SLB uses a hashing algorithm to
select a real server or not.
enableSpoofing boolean Optional Enables spoofing for reverse SLB
traffic.
responsePredSmoothFactor unsignedInt Optional Specifies the predictor smooth
factor.
enableCSW boolean Optional Enables the CSW policy.
tcpMss unsignedInt Optional Valid
value
range
is
from
64 to
9216. This parameter is to set the MSS
value for a specified port under a
virtual server on a Brocade Virtual
ADX
udpTransport boolean Optional Enables the UDP transport.
tcpTransport boolean Optional Enables the TCP transport.
TABLE 480 Attributes
Name Type Presence Rules Description
virtualServer Server Optional Identifies a virtual server to
which this port belongs.
serverStatus virtualServerAndPortStatusEnum Optional The status of the virtual server.
port L4Port Optional The virtual server port.
isSticky boolean Optional Specifies if the port is a sticky
port or not.
isConcurrent boolean Optional Specifies if the port is configured
for concurrent connections.
dsr dsrStateEnum Optional Specifies if DSR is enabled in on
the port.
currentConn unsignedInt Optional The number of client
connections currently on the
virtual server port.
peakConn unsignedInt Optional The highest number of
connections that the virtual
server port has had at the same
time.
TABLE 479 Attributes (Continued)
Name Type Presence Rules Description