Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 112)

102 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
image
This structure is the high-level description of any primary or secondary image.
InterfaceID
This structure is a high-level description of interface.
TABLE 249 Attributes
Name Type Required Rules Description
version string Yes The version of the primary or
secondary code.
size unsignedInt Yes The size of the primary or secondary
code.
label string Yes The name of the image.
builtOn string Yes The timestamp showing when the
image was built.
TABLE 250 Attributes
Parameters Type Presence Rules Description
portString string Optional When this parameter is present
as part of request message,
parameters “portString”, “slot”
and “port” must not be present. Interface port string. For
example:
1.Ethernet “1” or “1/1” etc.
2.Loopback “lb1” or “lb2”
etc.
3.Virtual “ve1” or “ve2” etc.
4.Management “mgmt1”
only.
interfaceType ipInterfaceTypeEnum Optional This parameter is Mandatory
and considered only when
“name” and “portString” are
NOT present. Interface type.
slot unsignedInt Optional When this parameter is present
as part of request message,
parameters “name” and
“portString” must not be
present.
This parameter value is ignored
For ADX 1U configuration. Interface slot number.
port unsignedInt Optional When this parameter is present
as part of request message,
parameters “name” and
“portString” must not be
present.
This parameter is mandatory
when “slot” is present with a
value. Interface port number.