Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 108)

98 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
HAbackupPort
This structure is the high-level description of of any HA ethernet port.
HASymmetricNodeConfiguration
This structure is a high-level description of the HA symmetric node configuration.
TABLE 239 Attributes
Name Type Required Rules Description
slot unsignedInt Optional The slot number.
port unsignedInt Optional Ethernet port number.
portString string Interface port string. For example:
•
Ethernet “1” or “1/1” etc.
•
Loopback “lb1” or “lb2” etc.
•
Virtual “ve1” or “ve2” etc.
•
Management “mgmt1” only.
vlanID unsignedInt Optional Identifies the VLAN ID of the VLAN to which
the port belongs.
isTagged boolean Optional Specifies whether the port is tagged or
untagged.
disableSTP boolean Optional Specifies whether the spanning tree
protocol is disabled for the VLAN ID.
sharedChassisMacA
ddress string Optional MAC address share between active or
standby node.
sharedMac boolean Optional Identifier for enabling shared mac option in
Brocade Virtual ADX
.
TABLE 240 Attributes
Name Type Required Rules Description
symmetricPort HASymmetricPort HA symmetric port.
symmetricPDURate HASymmetricPduRate The interval and wait time for
SSLB discovery packets.
symmetricMacAddress string The symmetric MAC address.
symmetricReactivationDelay unsignedInt The number of minutes the
recovered ADX to wait before
becoming active again.
symmetricGroupID unsignedInt The symmetric group ID.
activeActivePort HASymmetricPort HA symmetric port.
allowPassThroughVipTraffic boolean Enables to allow pass-through
traffic to a VIP.
sourceIP SourceIP The source IP.
standbySourceIP SourceIP The standby source IP.
enableSourceNat boolean Enables source NAT.
sourceNatIP SourceIP The shared source NAT IP
address.