Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 132)

122 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
3
SnmpViewSimpleFilter
This structure is a high-level description of filter for SNMP view filter information.
SntpServerConfig
This structure is the high-level description of Simple Network Time Protocol (SNTP) server
configuration.
SntpAssociation
This structure is the high-level description of SNTP association.
TABLE 298 Attributes
Parameters Type Presence Rules Description
field snmpViewFilterFieldEnum Mandatory Filter field name.
operator filterOperatorEnum Mandatory Filter operator type.
value string Optional Ignored when
“operator” value
is “RANGE”. Value of the field for
filtering.
startValue string Optional This parameter is
mandatory and
considered only
when “operator”
value is
“RANGE”. Start value in a range.
endValue string Optional This parameter is
mandatory and
considered only
when “operator”
value is
“RANGE”. End value in a range.
TABLE 299 Attributes
Name Type Required Rules Description
IP string Optional The IP address.
version unsignedInt Optional Specifies the SNTP version information
TABLE 300 Attributes
Name Type Required Rules Description
ipAddress string Optional Specifies the IP address of the peer.
version unsignedInt Optional Specifies the SNTP version number.
sntpClockStatus sntpClockStatusEnum Optional Specifies whether peer is statically
configured or synchronized.
refClockIPAddr string Optional Specifies the IP address of the peer’s
reference clock.
stratum unsignedInt Optional Specifies the NTP stratum level of the peer.
lastNtpPktRecvTime integer Optional Specifies the amount of time since the last
NTP packet was received from the peer.