Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 663)

Brocade Virtual ADX XML API Programmer’s Guide 653
53-1003248-01
Data structures
6
AclIpv6
This structure is a high-level description of IPV6 protocol information for ACL.
AclExtendedEntry
This structure is a high-level description of the ACL extended entry.
TABLE 245 Attributes
Name Type Presence Rules Description
matchIpv6FragmentsWithNonZeroOffset boolean Optional This parameter
is valid only
when value of
the protocol
parameter is
IPV6. Enables or disables the
matching IPv6 fragments
with a non zero fragment
offset.
matchIpv6SourceRoutedPacketsOnly boolean Optional This parameter
is valid only
when value of
the protocol
parameter is
IPV6. Matches only the source
routed packets.
TABLE 246 Attributes
Name Type Presence Rules Description
action aclActionEnum Mandatory Specifies the ACL
action - to permit or
deny.
protocol IpProtocol Mandatory The IP protocol (well
known name or
protocol number).
anySourceHost boolean Optional Either the
anySourceHost or
sourceHost
parameter must be
present. Both
cannot be present. Matches all the
source host
addresses.
sourceHost AclHost Optional Either the
anySourceHost or
sourceHost
parameter must be
present. Both
cannot be present. The ACL source host
details.
sourcePortFilter AclExtendedEntryPortFilter Optional Valid only when
protocol value is TCP
or UDP. Otherwise
ignored. The filter for source
port.
anyDestinationHost boolean Optional Either the
anyDestinationHost
or destinationHost
parameters must be
present. Both
cannot be present. Matches all the
destination host
addresses.