Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) User Manual
Page 771
Brocade Virtual ADX XML API Programmer’s Guide
761
53-1003248-01
List of Error Messages
A
NET_VRRP_IPV4_ADDRESS_CONFIG_ON_INTERFACE
_FAILED
The VRRP IPv4 address configuration on interface failed.
The local IP address %I in this interface cannot be used as
the VRRP IP address.
NET_VRRP_IPV6_ADDRESS_CONFIG_ON_INTERFACE
_FAILED
The VRRP IPv6 address configuration on interface failed.
The local IP address %s in this interface cannot be used
as the VRRP-E IP address.
NET_VRRP_MISSING_INTERVAL
The %s Interval value is missing. Please specify a %s
Interval value in the range of %d to %d.
NET_VRRP_MISSING_OR_INVALID_PASSWORD
The VRRP Interface password missing or invalid. Please
specify a valid password not more than 8 characters.
NET_VRRP_MISSING_PRIORITY
The %s Priority value is missing. Please specify a %s
priority value in the range of %d to %d.
NET_VRRP_MISSING_VRID
The VRID value is missing. Please specify VRID value in
the range of 1 to 255.
NET_VRRP_NO_MORE_VIRTUAL_IP_CONFIG
The Virtual IP address configuration failed. Only one
virtual IP address can be defined at a time.
NET_VRRP_NOT_ENABLED
VRRP or VRRP-E is not enabled. Please enable VRRP or
VRRP-E or VRRP-E-IPv6.
NET_VRRP_PREEMPT_MODE_SET_FAILED
The setting of a non-preempt mode failed. Non-preempt
mode can only be defined by a backup router.
NET_VRRP_ROUTER_TYPE_MISSING
The VRRP Router type is missing. Please specify the VRRP
Router type as OWNER or BACKUP.
NET_VRRP_TRACKPORT_SET_FAILED
Track Port is not an IP configurable virtual interface.
Please specify a valid IP configurable virtual interface.
NET_VRRP_TYPE_ALREADY_CONFIGURED
%s is already configured on the ADX. Please remove
current VRRP setting before applying new VRRP type.
NET_VRRP_TYPE_MISMATCH
There is a VRRP type mismatch. The given VRRP type
does not match with the current configuration %s.
NET_VRRP_TYPE_MISSING
The VRRP type is missing. Please specify the VRRP type
as VRRP or VRRP-E or VRRP-E-IPv6.
NET_VRRP_TYPE_NOT_CONFIGURED
%s is not configured on the Brocade Virtual ADX device.
Please specify the current VRRP type. Execute the
getVrrpInstance API to get the currently configured VRRP
types.
NET_VRRP_VIP_CONFIG_FAIL_BROADCAST_ADDRES
S
The Virtual IP address configuration failed. The IP
address configured is a broadcast IP address.
NET_VRRP_VIP_CONFIG_FAIL_SUBNET_MASK
The Virtual IP address configuration failed. The Local IP
address on the same subnet must be defined first.
NET_VRRP_VRID_IP_ALREADY_IN_USE
IP configuration for VRID failed. IP address %I already
used by VRID %u as owner. Please specify new valid IP
Address.
NET_VRRP_VRID_IP_CONFIG_FAILED
IP configuration for VRID failed. Please specify a local IP
address in this interface.
TABLE 109
List of error messages
Error String
Message