Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 525)

Brocade Virtual ADX XML API Programmer’s Guide 515
53-1003248-01
Data structures
5
VirtualServerConfiguration
This structure a high-level description of any virtual server configuration.
TABLE 472 Attributes
Name Type Presence Rules Description
virtualServer Server Optional The virtual server name.
clientMaxConnLimit string Optional The maximum number of client
connections allowed for the virtual
server.
clientTcpRateTransactionLimit string Optional The maximum number of TCP
transactions allowed for the virtual
server.
clientUdpRateTransactionLimit string Optional The maximum number of UDP
transactions allowed for the virtual
server.
clientIcmpRateTransactionLimit string Optional The maximum number of ICMP
transactions allowed for the virtual
server.
description string Optional The description of the virtual server.
stickyAge unsignedInt Optional The number of minutes that a sticky
server connection can remain inactive
before aging out. The range is from 2 to
60 minutes.
tcpAge unsignedInt Optional The number of minutes that the
Brocade Virtual ADX allows a TCP
connection to remain unused
before closing the connection. The
range is from 2 to 60 minutes.
udpAge unsignedInt Optional The number of minutes that the
Brocade Virtual ADX allows a UDP
connection to remain unused
before closing the connection.
allowAdvertiseVipRoute boolean Optional Permit the availability of a virtual
server address to be advertised
throughout the network.
enableAdvertiseVipRoute boolean Optional Enable the availability of a virtual
server address to be advertised
throughout the network.
symPriority unsignedInt Optional The Symmetric SLB priority configured
on the Brocade Virtual ADX.
symPriorityFactor unsignedInt Optional The current dynamically set priority and
the decrement value.
allowInjectAlways boolean Optional Enables the Brocade Virtual ADX to
inject a VIP route inside the routing
process regardless of its virtual server
ownership status.
injectAlways boolean