Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 330)

320 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
4
VRIDDetails
This structure is a high-level description of VRID details.
VRIDSummary
This structure is a high-level description of the VRID summary.
TABLE 770 Attributes
Members Type Presence Rules Description
VRID unsignedInt Mandatory VRID
type vrrpTypeEnum Mandatory VRRP type
interface InterfaceID Mandatory Interface on which VRRP configured
IPAddress string Optional Virtual IPv4 or IPv6 address
state vrrpStateEnum Optional Init/Master/Backup
adminState twoWayToggleEnum Optional Administrative status
mode vrrpRouterTypeEnum Optional OWNER or BACKUP mode
priority unsignedInt Optional 3-254 The configured VRRP priority of this
Layer 3 Switch for the VRID.
currentPriority unsignedInt Optional 3-254 The current VRRP priority of this Layer 3
Switch for the VRID.
trackPriority unsignedInt Optional Track priority
helloInterval unsignedInt Optional 1-84
sec/60-3
600 sec Master/ backup router’s hello message
interval
deadInterval unsignedInt Optional 1-84 sec The configured number of seconds a
Backup waits for a Hello message from
the Master before determining that the
Master is dead.
currnetDeadInter
val unsignedInt Optional 1-84 sec The current dead interval.
advertiseBack twoWayToggleEnum Optional Enable a backup to send Hello
messages.
backupPreempt twoWayToggleEnum Optional Enable or disable preemption on a
Backup.
TABLE 771 Attributes
Members Type Presence Rules Description
type vrrpTypeEnum Mandatory VRRP type
interface InterfaceID Mandatory Interface on which the VRRP is
configured.
VRID unsignedInt Optional VRID
IP string Optional IPv4 or IPv6 address
state vrrpStateEnum Optional Enabled or disabled
routerType vrrpRouterTypeEnum Optional OWNER or BACKUP