Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 199)

Brocade Virtual ADX XML API Programmer’s Guide 189
53-1003248-01
Methods
4
Parameters
Table 468 contains the parameters required for the method.
Return values
Table 469 contains the return values of the method.
Error messages
List of Error Messages .
getAllStaticArpEntries
Description
Retrieves all of the static ARP information.
Parameters
Table 470 contains the parameters required by the method.
TABLE 468 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional When both the
startIndex and the
numRetrieved
parameters are not
present, then the
available number
of IP addresses are
retrieved. The start index for retreiving the
configured IP addresses.
numRetrieved unsignedInt Optional When both the
startIndex and the
numRetrieved
parameters are not
present, then the
available number
of IP addresses is
retrieved. The number of IP addresses to be
retrieved. Maximum value allowed is
2000.
filter SourceIPFilter Optional The filter criteria.
TABLE 469 Return values
Name Type Description
genericInfo ResponseInformation Identifies the generic information about all of the MAC entries available in
the device.
ipList SourceIP [] List of IP configured addresses.
TABLE 470 Parameters
Name Type Presence Rules Description
startIndex unsignedInt Optional Identifies the starting index.
numRetrieved unsignedInt Optional Identifies the number of sessions to be retrieved.
Maximum value allowed is 10.
filterInfo IPFilter Optional Specifies the filter criteria.