Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 586)

576 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Methods
6
Return values
Table 50 contains the return value of the method.
Error messages
List of Error Messages
setIPNatStatusOnRouter
Description
Sets the IP NAT status on the router.
Parameters
Table 51 contains the parameters required for the method.
Error messages
List of Error Messages
setNatConfig
Description
Sets NAT configurations.
Parameters
Table 52 contains the parameters required for the method.
Error messages
List of Error Messages
unbindAclFromNatPools
Description
Unbinds a private address range (ACL) with a pool of Internet addresses and disables PAT.
TABLE 50 Return value
Name Type Description
infoList NatRedundancyInfo [] NAT redundancy information list.
TABLE 51 Parameters
Name Type Presence Rules Description
id InterfaceID Mandatory Interface on which NAT is being enabled.
enableInside boolean Optional Enable NAT inside
enableOutside boolean Optional Enable NAT outside
TABLE 52 Parameters
Name Type Presence Rules Description
config NatConfig Mandatory NAT configurations.