Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 720)

710 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data Structures
7
gslbSiteOptimization
This structure is the high-level description of GSLB optimization parameters.
gslbSiteParameters
This structure is the high-level description of GSLB site ADX parameters.
TABLE 65 gslbSiteOptimization structure
Name Type Presence Rules Description
enableOptimizedVipListSending boolean Optional Default value is
"FALSE". Enable or disable
sending the VIP list
from the controller in
a more optimal
manner.
disableSendingActiveBindings boolean Optional Default value is
"FALSE". If site ADX is hosting
more than 217 GSLB
enabled VIPs, then
you need to disable
the site ADX from
sending active
binding information.
TABLE 66 gslbSiteParameters structure
Name Type Presence Rules Description
enableGslbProtocol boolean Mandatory Default value is
"FALSE". Enable or disable the GSLB
protocol.
tcpPortNumber unsignedInt Optional Default value is 182. Specifies the TCP port
number you want the
Brocade Virtual ADX to use
for exchanging GSLB
information with other
Brocade Virtual ADXs.
disableRttGathering boolean Default value is
"FALSE". Enable or disable RTT
gathering on the GSLB ADX.
The Brocade Virtual ADX
must be running protocol
version 3 and higher.
maxVipListPorts unsignedInt Valid value range is
from 5 to 30. The
default number of
ports is 10. Configures maximum
number of ports per VIP in
VIP list.
disableSendingVip boolean Default value is
"FALSE”. Enable or disable globally
sending the VIP list.
disableNagle boolean Default value is
"FALSE”. Disable TCP nagle algorithm
for GSLB communication.