Brocade Virtual ADX XML API Programmer’s Guide (Supporting ADX v03.1.00) - Manual (Page 532)

522 Brocade Virtual ADX XML API Programmer’s Guide
53-1003248-01
Data structures
5
enableSSLSessionidSwitching boolean Optional Enables SSL session ID switching
on the virtual server port.
enableSwL4Pbslb boolean Optional Enables policy-based SLB on a
virtual server port.
enableWaitforEndHTTP boolean Optional The device buffers all request
packets until all the necessary
information is received ensuring
that the whole HTTP header is
saved.
minimumHealthyServers unsignedInt Optional The minimum number of real
server ports that are bound to the
virtual server port and are healthy
and in the UP state.
enableNoStickyExceedMax boolean Optional Enables the no-sticky-exceed-max
setting on the virtual server port.
tcpOnly boolean Optional Allows only TCP traffic to the
virtual server port.
enableUDPFastDelCnt boolean Optional Enables UDP fast aging. The
device detects a server response
to a client request, and if the
response is not fragmented, the
session table entry is deleted
immediately.
udpOnly boolean Optional Allows only UDP traffic to the
virtual server port.
cswPolicy string Optional Name of the CSW policy.
sslReencrypt unsignedInt Optional 0 = SSL not configured
1 = SSL Proxy mode
2 = SSL Terminate mode
sslProfiles SSLProfile [ ]
portPolicyName string Optional Name of the port policy
enableBackupServerUse boolean Optional Identifies whether to use the
backup server when the server
associated with this port goes
down.
enableBackupStayActive boolean Optional Identifies whether this port should
keep using the backup server
even if primary server has become
active again.
enableTrackPortgroup boolean Optional Enables track port group,
therefore the Brocade Virtual ADX
sends a client’s requests for any
of the applications in the group to
the same real server, regardless
of the application in which the
client requests first.
TABLE 479 Attributes (Continued)
Name Type Presence Rules Description