Resource block, 1 general, 2 alarm processing – Yokogawa YVP110 User Manual
Page 66: 3 device status, Resource block -1, General -1, Alarm processing -1, Device status -1

<11. Resource Block>
11-1
IM 21B04C01-01E
11. Resource Block
11.1 General
The resource block stores device hardware
information related to all function blocks in the same
device, such as the memory size, and controls
the device hardware and internal function blocks.
Regardless of the execution schedule of the
function blocks, the resource block runs at a certain
interval.
11.2 Alarm Processing
The resource block generates a block alarm in the
following cases:
• An error represented by a bit in BLOCK_
ERROR, shown in the table below, has
occurred (identified as a Block alarm).
• A static parameter has been written (identified
as an update event).
• The value of a write-locked parameter has been
modified (identified as Write alarm).
Table 11.1
BLOCK_ERROR in Resource Block
Bit
Name of Error
Represented
Cause
3
Simulate Active
SIMULATE is active.
5
Device Fail Safe Set
Fail safe function is set.
10 Lost Static Data
11 Lost NV Data
13 Device Needs
Maintenance Now
Needs servicing urgently.
15 Out-of-Service
The target mode is O/S.
11.3 Device Status
When fault occurs, the corresponding bits in the
parameters DEVICE_STATUS_1 to _3 of the
resource block are set on. Table 11.2 to 11.4 show
the codes and indication corresponding to the
individual bits in DEVICE_STATUS_1 to _3 as well
as the meanings represented.
Table 11.2 DEVICE_STATUS_1 (without /EE)
Hexadecimal
Indication
Indication
when Device
Description is
installed.
Meaning
0x80000000
0x40000000
0x20000000
0x10000000
0x08000000
0x04000000
0x02000000
0x01000000
0x00800000 Sim.enable
Jmpr On
The SIM.ENABLE switch on the
amplifier is set to ON.
0x00400000 RB in O/S
mode
The Resource block is in O/S
mode.
0x00200000
0x00100000
0x00080000 EEPROM
Failure
EEPROM failure
0x00040000
0x00020000
0x00010000
0x00008000 Link Obj.1/17
not open
The VCR*
1
to which link object 1
or 17 is specified to be linked is
not open.
0x00004000 Link Obj.2/18
not open
The VCR*
1
to which link object 2
or 18 is specified to be linked is
not open.
0x00002000 Link Obj.3/19
not open
The VCR*
1
to which link object 3
or 19 is specified to be linked is
not open.
0x00001000 Link Obj.4/20
not open
The VCR*
1
to which link object 4
or 20 is specified to be linked is
not open.
0x00000800 Link Obj.5/21
not open
The VCR*
1
to which link object 5
or 21 is specified to be linked is
not open.
0x00000400 Link Obj.6 /22
not open
The VCR*
1
to which link object 6
or 22 is specified to be linked is
not open.
0x00000200 Link Obj.7/23
not open
The VCR*
1
to which link object 7
or 23 is specified to be linked is
not open.
0x00000100 Link Obj.8/24
not open
The VCR*
1
to which link object 8
or 24 is specified to be linked is
not open.