Yokogawa YVP110 - Manual (Page 113)

A-2
IM 21B04C01-01E
Relative
Index Index
Parameter Name
Default
(factory setting)
Write Description
16 1016 RESTART — Restart the YVP110 in the selected way.
1: Running
2: Restart Resource
3: Restart with the default settings defined in FF
specifications.* 1
4: Restart CPU
17 1017 FEATURES — — Shows supportable optional features of the block.
18 1018 FEATURE_SEL . — Parameter used to select the optional features of
the resource block
19 1019 CYCLE_TYPE Scheduled — Bit string indicating cycle types executable for the
resources
Bit 0: Scheduled; to be scheduled
Bit 1: Event driven; to be driven by an event
Bit 2: Manufacturer specified; executable by a
manufacturer-specified unique function
20 1020 CYCLE_SEL Scheduled Bit string used to select the cycle type
21 1021 MIN_CYCLE_T 3200 (100ms) — Minimum execution cycle
22 1022 MEMORY_SIZE 0 — Memory size allowed for use of function block
configurations in the device; checked before a
download, but not supported by the YVP110.
23 1023 NV_CYCLE_T 0 — Cycle of saving the settings of non-volatile
attribute parameters to the EEPROM. 0 is set with
the YVP110, and saving is not cyclically done.
24 1024 FREE_SPACE 0 — Shows the free space memory for configurations
as a percent value. YVP110 shows zero which
means the pre-configured resource.
25 1025 FREE_TIME 0 — Shows the free time that can be used for
computations by resources but not supported by
the YVP110.
26 1026 SHED_RCAS 640000 Communication time-out setting for
communications with the device from which the
remote cascade setpoint is sent.
27 1027 SHED_ROUT 640000 Communication time-out setting for
communications with the device from which the
remote output setting is sent; not used in the
YVP110, however.
28 1028 FAULT_STATE 1 — Indicates the fault-state.
29 1029 SET_FSTATE 1 Sets the fault-state.
30 1030 CLR_FSTATE 1 Clears the fault-state.
31 1031 MAX_NOTIFY 3 — Maximum number of alerts retained in the device
(YVP110).
32 1032 LIM_NOTIFY 3 Maximum number of alerts to be held by the
device (YVP110); used by the user to restrict the
number of alert notifications to the host to prevent
overflow of alert receptions in the host.
33 1033 CONFIRM_TIM 20000 (ms) Defines the time to wait for confirmation for an
alert.
34 1034 WRITE_LOCK Unlocked Prohibits write access from outside the device to
the settings.
35 1035 UPDATE_EVT — — Shows the contents of an update event upon
occurrence.
36 1036 BLOCK_ALM — — Shows the contents of an alarm event upon
occurrence.
37 1037 ALARM_SUM Enable Shows the alarm summary for all blocks within the
device (YVP110).
38 1038 ACK_OPTION 0xFFFF Defines the acknowledgment action of each alarm
type. By setting a bit to 1, the corresponding alarm
will behave as acknowledged immediately when
it occurs without receipt of acknowledgment from
the host.