IAI America RCM-GW-DV - Manual (Page 127)

121
DeviceNet Gateway
Regardless of whether free assignment or fixed assignment is used, Gateway Unit addresses will be
assigned as follows. Inputs and outputs will each occupy 24 channels. (Axes 0 and 1 are physically used.)
(Position-number specification mode)
PLC output PLC input
Control signal (0)
Control signal (1)
Control signal (2)
Control signal (3)
Control signal (4)
Control signal (5)
Control signal (6)
Control signal (7)
Control signal (8)
Control signal (9)
Control signal
(10)
Control signal
(11)
Control signal
(12)
Control signal
(13)
Control signal
(14)
Control signal
(15)
Cannot be used.
Gateway control signal 0 Gateway status signal 0
Gateway control signal 1 Gateway status signal 1
Note
address
Position number
axis (0)
Position number
axis (1)
Position number
axis (2)
Position number
axis (3)
Position number
axis (4)
Position number
axis (5)
Position number
axis (6)
Position number
axis (7)
Position number
axis (8)
Position number
axis (9)
Position number
axis (10)
Position number
axis (11)
Position number
axis (12)
Position number
axis (13)
Position number
axis (14)
Position number
axis (15)
Status signal (0)
Status signal (1)
Status signal (2)
Status signal (3)
Status signal (4)
Status signal (5)
Status signal (6)
Status signal (7)
Status signal (8)
Status signal (9)
Status signal (10)
Status signal (11)
Status signal (12)
Status signal (13)
Status signal (14)
Status signal (15)
Completed position
number (0)
Completed position
number (1)
Completed position
number (2)
Completed position
number (3)
Completed position
number (4)
Completed position
number (5)
Completed position
number (6)
Completed position
number (7)
Completed position
number (8)
Completed position
number (9)
Completed position
number (10)
Completed position
number (11)
Completed position
number (12)
Completed position
number (13)
Completed position
number (14)
Completed position
number (15)
Cannot be used.