Avaya Cajun P880 - Manual (Page 99)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-89
qos-set
Command Mode
Configuration
Description
Create a Quality of Service (QoS) set. Use the no form of this
command to delete a QoS set.
Syntax
qos-set
no qos-set
Table 1-56. Parameters, Keywords, Arguments
Sample Output
This example creates then deletes QoS set 24 in QoS Domain ID 12.
ATM(configure)# qos-set 12 24
QoS Set QosSet12.24 created successfully
ATM(configure)# no qos-set 12 24
QoS Set QosSet12.24 successfully removed
Name Definition
qosDomainID The QoS domain ID number. The range of
values is: Minimum = 1, Maximum = 128.
qosHandle The QoS set ID number. The range of values is:
Minimum = 0, Maximum = 1000.
Note:
this parameter must be unique across
ALL QoS Sets irrespective of QoS
Domains. In other words, every QoS
Set must have a unique qosHandle
within an ATM Uplink module.