Avaya Cajun P880 - Manual (Page 21)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-11
set atm-link default-PVC
Command Mode
Configuration
Description
Sets the default virtual channel for an ATM Link. This command is
used when the VSP is a Replicating. With a Replicating VSP, each
ATM Link in the VSP has its own Default PVC.
In a Non-Replicating VSP, the Default PVC is set for the VSP itself,
not the ATM Link within it.
Syntax
set atm-link default-PVC
Table 1-8. Arguments, Parameters, Keywords
Sample Output
This example sets the default PVC for ATM Link “Link1” to the PVC
whose ID is 1-0-300.
ATM(configure)# set atm-link Link1 default-
PVC 1-0-300
Default PVC 1-0-300 has been set for ATM Link
Link1
Name Definition
vsportId Virtual switch port Identifier. Range is 1 - 128.
pvcId Virtual channel identifier. When a PVC is
created, the ATM Uplink module assigns the
vcID to the PVC. The format of the vcID is
-- (ex: 1-0-300)
Use the show pvc to display the
list of PVC configured within the ATM Link
Use th e show atm-link
[] to get the name of an ATM-Link
whose name is greater than 10 characters.