Avaya Cajun P880 - Manual (Page 104)

1-94
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set qos-set (red-pack)
Command Mode
Configuration
Description
Sets the Random Early Detection (RED) pack associated with the
QoS Set.
* Note: RED cannot be set for UBR traffic class Virtual Circuits
Syntax
set qos-set red-pack
Table 1-61. Parameters, Keywords, Arguments
Sample Output
This example assigns RED Pack 3 to QoS Set 24 in QoS Domain 12.
ATM(configure)# set qos-set 12 24 red-pack 3
RED Pack set successfully
Name Definition
qosDomainID The QoS domain ID number. The range of
values is: Minimum = 1, Maximum = 128.
qosHandle The QoS set ID number. The range of values is:
Minimum = 0, Maximum = 1000.
Note:
this parameter must be unique across
ALL QoS Sets irrespective of QoS
Domains. In other words, every QoS
Set must have a unique qosHandle
within an ATM Uplink module.
redID There are five possible RED Pack ID’s. Values 1
through 4 assign the respective RED Pack
parameters. A value of 0 disables RED for this
QoS Set.