Avaya Cajun P880 - Manual (Page 85)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-75
set pvc priority
Command Mode
Configure
Description
Sets the inbound priority for the specified pvc. Traffic received on
this PVC will be forwarded through the Avaya switch at this priority
level.
Syntax
set pvc priority
Table 1-45. Arguments, Parameters, Keywords
Sample Output
The following sets the priority of the pvc to 3
ATM(configure)# set pvc 1-4-101 priority 3
Inbound priority 3 set successfully for PVC 1-
4-101
Name Definition
pvcID The identifier for the pvc. It is equal to
<physPort> - <vpi> - <vci>
(e.g., port number 1 with a vpi of 4 and a vci of
101 would have a pvcID of 1-4-101)
priority The priority of the pvc. Range is 0 - 7.