Set pvc red-pack, Command mode, Description – Avaya Cajun P880 User Manual
Page 86: Syntax, Sample output

1-76
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set pvc red-pack
Command Mode
Configure
Description
Sets the Red-Pack (random early detection) ID for the specified pvc.
* Note: RED is always disabled and cannot be set for UBR traffic
class PVCs.
Syntax
set pvc
Table 1-46. Arguments, Parameters, Keywords
Sample Output
The following example sets the red-id of the pvc to 3.
ATM(configure)# set pvc 1-4-101 red-pack 3
Red Pack set successfully for PVC 1-4-101
Name
Definition
pvcID
The identifier for the pvc. It is equal to
<physPort> - <vpi> - <vci>
(e.g., port number 1 with a vpi of 4 and a vci of
101 would have a pvcID of 1-4-101)
redID
The RED ID of the pvc. Range is 1 - 4. Use 0 to
disable RED on this pvc.