Avaya Cajun P880 - Manual (Page 45)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-35
set lec (disable | enable)
Command Mode
Configuration
Description
Enable or disable a LEC.
* Note: You must disable a LEC each time you make a change to
the configuration. After you make configuration
changes, you must enable the LEC in order for the
changes to take effect.
Syntax
set lec {disable | enable}
Table 1-26. Parameters, Keywords, Arguments
Sample Output
This example illustrates how to disable and enable LEC 2.
ATM(configure)# set lec 2 disable
LEC 2 has been disabled
ATM(configure)# set lec 2 enable
LEC 2 has been enabled
Name Definition
lecID The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
disable | enable Enables or disables a LEC.