Avaya Cajun P880 - Manual (Page 103)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-93
set qos-set (priority)
Command Mode
Configuration
Description
Set the inbound priority for a QoS set. Frames received on a VC
created with this QoS Sets traffic parameters will be forwarded
through the network at this Ethernet priority.
Syntax
set qos-set priority
Table 1-60. Parameters, Keywords, Arguments
Sample Output
This example sets the inbound priority for QoS set 24 in QoS
Domain 12 to Ethernet priority 6.
ATM(configure)# set qos-set 12 24 priority 6
Priority Mapping Index set successfully
Name Definition
qosDomainID The QoS domain ID number. The range of
values is: Minimum = 1, Maximum = 128.
qosHandle The QoS set ID number. The range of values is:
Minimum = 0, Maximum = 1000.
Note:
this parameter must be unique across
ALL QoS Sets irrespective of QoS
Domains. In other words, every QoS
Set must have a unique qosHandle
within an ATM Uplink module.
priority The QoS set priority. The range of values is:
Minimum = 0, Maximum = 7. The default
value is 0.