Avaya Cajun P880 - Manual (Page 144)

1-134
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
show vport
Command Mode
All Modes
Description
Show Virtual Port configuration information.
Syntax
show vport [ ]
* Note: interfaceID and vpiNumber must either be omitted or
include. You cannot enter one without the other. If
omitted, all Virtual Ports will be displayed with
summarized information
Table 1-84. Parameters, Keywords, Arguments
Sample Output
This example shows configuration information for VPORT 1 5.
ATM(configure)# show vport 1 5
ATM Virtual Port 1 VPI 5 Configuration:
=======================================
Name : dawes
Admin Status : Enabled
Oper Status : Dormant
Path Cost : 15000000
Max VCI : 22000
ILMI (Add Reg) : 4.0 (Yes)
ILMI State : -
ILMI Keepalive : -
Traffic Shape Rate(cps) : 0
Signaling Type : AUTO
Signaling State : -
Name Definition
interfaceID The ATM Interface number. The range of
values is: Minimum = 1, Maximum = 2.
vpiNumber The VPI number. The range of values is:
Minimum = 0, Maximum = 255.