Avaya Cajun P880 - Manual (Page 150)

1-140
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set vsport default-PVC
Command Mode
Configuration
Description
Sets the default Permanent Virtual Circuit (PVC) for the Virtual
Switched Port identified by vsportId. This command is only used for
Non-Replicating VSPs. If the VSP is replicating, each individual
ATM-Link in the VSP has its own Default PVC. See the set atm-
link default-pvc command.
Syntax
set vsport default-PVC - for non
replicating only
Table 1-88. Arguments, Parameters, Keywords
Sample Output
The following example sets the Default PVC for VSP 4 to Physical
Port 1, VP 7, VC 100.
ATM(Configure)# set vsport 4 default-PVC 1-7-
100
Default-PVC 1-7-100 set for vsport 4
Name Definition
vsportId Virtual Switched Port Identifier. Possible values
range from 1 - 128.
vcId Virtual Connection Identifier. PhysicalPort-
VPi-VCi: For example PVC on Physical port 1,
with VPi 7, VCi 100 would be 1-7-100