Avaya Cajun P880 - Manual (Page 17)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-7
Supervisor Commands
This section describes the Smart Module Command set, which
currently consists of the set smart-module flash command.
set smart-module flash
Command Mode
Configuration
Description
Sets the image that the ATM module should boot from.
* Note: This command is only executable from the supervisor
module.
Syntax
set smart-module flash {app1|app2|boot}
Table 1-6. Parameters, Keywords, Arguments
Sample Output
This example sets the boot image for the ATM module in slot 3 to
app2.
Avaya(configure)# set smart-module flash 3
app2
Smart Module in slot 3 is now set to boot from
"app2".
Avaya(configure)#
Name Definition
mod-num The slot number of the smart module being
specified.
app1 | app2 | boot The boot image in which the smart module’s
flash memory should boot.