Avaya Cajun P880 - Manual (Page 56)

1-46
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set lec (version)
Command Mode
Configuration
Description
Set the LEC version.
* Note: You must disable a LEC each time you make a change to
the configuration. After you make configuration
changes, you must enable the LEC in order for the
changes to take effect.
Syntax
set lec version {v1 | v2}
Table 1-37. Parameters, Keywords, Arguments
Sample Output
This example sets LEC 2 to version V1.
ATM(configure)# set lec 2 disable
LEC 2 has been disabled
ATM(configure)# set lec 2 version v1
Version V1 has been set for LEC 2
ATM(configure)# set lec 2 enable
LEC 2 has been enabled
Name Definition
lecID The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
v1 | v2 Set the LEC version to v1 or v2.