Avaya Cajun P880 - Manual (Page 94)

1-84
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
set qos-domain (mapping)
Command Mode
Configuration
Description
Map Ethernet Frames with a particular priority to a QoS Set.
Syntax
set qos-domain mapping
Table 1-53. Parameters, Keywords, Arguments
Sample Output
This example maps QoS Set ID 24 in QoS domain 12 to the Ethernet
priority 6. Any traffic with Ethernet priority 6 will be forwarded
down a PVC with the traffic class and parameters of QoS Set 24.
ATM(configure)# set qos-domain 12 mapping 24
6
Mapping set successfully
Name Definition
qosDomainID The QoS Domain ID number. The range of
values is: Minimum = 1, Maximum = 128.
qosHandle The QoS Set ID number. The range of values is:
Minimum = 0, Maximum = 128.
Note:
this parameter must be unique across
ALL QoS Sets irrespective of QoS
Domains. In other words, every QoS
Set must have a unique qosHandle
within an ATM Uplink module.
priority The priority setting of a QoS set. The range of
values is: Minimum = 0, Maximum = 7.