Erase startup-config – Avaya Cajun P880 User Manual
Page 122
1-112
Chapter 1
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
erase startup-config
Command Mode
Configuration or Enable
Description
Erase the startup (bootup) configuration file from NVRAM.
* Note: You should copy the startup-config to TFTP first, or copy
the running-config to startup-config afterward. If no
config is copied back to startup-config, the ATM Uplink
module will boot with the default factory configuration.
CAUTION
This command permanently erases the startup configuration
from NVRAM.
Syntax
erase startup-config
Example
This example shows the help form of the erase startup-config
command.
ATM(configure)# erase startup-config
File ‘/nvram/startup.txt’ deleted.